Panasonic CF-47 - Manual (Page 13)

13
3
Select your application
You are able to start working on your computer.
If security indicator ( ) is displayed,
you must first enter your User Password ( "Security Measures" )
* 1 If you are starting from the suspend mode ( "Suspend / Hiber-
nation Functions"), if after three attempts the correct password is not in-
put, or if no password is entered for about a minute, the computer returns
to the suspend mode.
When an application or file that was previously displayed
appears on your screen,
the suspend or hibernation mode ( "Suspend / Hibernation Functions")
has been set.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start * 1
(Power off)
Upon entering your User
Password and pressing
Enter
NOTE
The power saving function is factory set, so if there is no input from a key, the touch
pad, or the external mouse for two minutes, the LCD is powered off (ECO mode).
The LCD will resume operation when the touch pad or the external mouse is used or
a key is pressed.
The computer may enter the ECO mode while Windows is setting up or even when
an application software is being installed. In this case, because it is conceivable
that a selection dialog box will be shown, for resuming from the ECO mode, do not
press
Enter which may trigger a selection, instead, press a key unrelated to the
direct triggering of a selection, like the key.
The power saving mode ([Power Scheme] in [Control Panel] - [Power Management]) is
factory set, so if there is no input from a key, the touch pad, or an external mouse (when one
is connected) for a certain interval of time, the power to the LCD is cut, and the power to
the hard disk is shut off. In addition, when the computer is left alone, it automatically
enters the suspend* mode ( "Suspend/Hibernation Functions").
The LCD will resume operation when the touch pad is used or a key, or an external
mouse is pressed.
The power to the LCD may be turned off while Windows is setting up or even when
an application software is being installed. In this case, because it is conceivable
that a selection dialog box will be shown, do not press the
Enter key to attempt
to resume from this condition as doing so may trigger a selection, but instead, press
a key unrelated to the direct triggering of a selection, like the
Ctrl key.
*With Windows 98, "Suspend" is called "Standby".
Windows 95
Windows 98
Ctrl