Philips 105S7 - Manual (Page 4)

Troubleshooting
No color or intermittent
color
●
If you are using a non-VESA-DDC standard video card, turn the
DDC1 / 2B feature Off.
Color appears blotchy
●
The picture may need degaussing.
●
Remove any nearby magnetic objects.
●
Face the monitor toward the East for the best picture quality.
Missing one or more
colors
●
Check the Color Temperature.
●
Make sure the monitor cable is properly connected to your
computer.
●
Check to see if the monitor cable has bent pins.
Dim Picture
●
Adjust the Brightness and Contrast controls.
●
Check your video card and it's owner's manual instructions for it
may be a non-VESA-DDC Standard card.
Picture is too large or too
small.
●
Adjust the Horizontal and/or Vertical Size.
Edges of the picture are
not square. ●
Adjust the geometry.
Picture has a double
image.
●
Eliminate the use of a video extension cable and/or video switch
box.
●
Face the monitor toward the East for the best picture quality.
Picture is not sharp.
●
heck to make sure Moire Function is switched off.
Unstable Picture
●
Increase your refresh rate.
Problem with On Screen
Display
●
Refer to the instructions and troubleshooting information in that
chapter.
For further assistance, refer to the Consumer Information Centers list to contact your local Philips
distributor.
file:///C|/Documents%20and%20Settings/lynn/My%20Docu...nual/multi_manual/ENGLISH/105S7/SAFETY/saf_troub.htm (2 / 3) [2004/9/24 ÿdUÿdÿˆ 11:40:35]