Philips SRU 7140 - Manual (Page 10)

10
User Manual
English
Troubleshooting
Problem
Remote control does not
operate your product.
Remote control does not
operate some features of your
product.
Device mode indicator blinks for
3 seconds after you program a
product code.
Solution
Learn the device button for the
product to operate the required
functions of the product.
See ‘Code learning’.
Program the remote control
with a new code.
Install new batteries (you might
have to reprogram your remote
control after installing new
batteries).
Remote control may not be
compatible with your product.
Program the remote control
with a new code.
Remote control may not be able
to operate all features of your
product or key names might be
different than on your product.
Remote control did not accept
the code.
Try to program the code again
or try a different code.
SRU7140_10 03-07-2007 09:53 Pagina 10