Panasonic AK-HC3500P - Manual (Page 31)

31
Menu Item Adjustment setting range Initial value Items recorded on SD cards
Setting1 HD-SDI OUT MAIN, VF, RET MAIN
HD-SDI Power ACTIVE, SAVE ACTIVE
AUX I/O RET Y IN, PMT OUT, VBS OUT, D1 OUT RET Y IN
TRUNK1 RS4, RS3C RS4
TRUNK RS4, RS3C RS4
5600K OFF, ON OFF
Setting HND GRIP RET A, B, PTT A 
HND GRIP PTT PTT, A, B PTT 
HND Lens VTR PTT, A, B, VTR B 
HND Lens RET A, B A 
STD Lens RET1 A, B A 
STD Lens RET A, B B 
EXT RET 1 A, B A 
EXT RET  A, B B 
EXT RET 3 A, B B 
Setting3 RET1 ID Enables a name (5 characters) to be set. RET1 
RET ID Enables a name (5 characters) to be set. RET 
RET3 ID Enables a name (5 characters) to be set. RET3 
RET4 ID Enables a name (5 characters) to be set. RET4 
Gain SW LOW –6 dB to 36 dB (in 3 dB increments) 0 dB 
Gain SW MID –6 dB to 36 dB (in 3 dB increments) 6 dB 
Gain SW High –6 dB to 36 dB (in 3 dB increments) 1 dB 
ID Character Enables a name (10 characters) to be set. — 
Setting4 User SW1 A, B, PTT, DISP, MARK OFF A 
User SW A, B, PTT, DISP, MARK OFF PTT 
User SW3 A, B, PTT, DISP, MARK OFF PTT 
User B/U A, B, PTT, DISP, MARK OFF, LENS EXT PTT 
Back Light 1 to 70 0 
RET Mode NORM, TOGGLE, SEQ. NORM 
Lens I/F Serial, Analog Analog 
B/U Lens BOX, PORTABLE BOX 
!LED Gamma Off OFF, ON OFF 
Shutter OFF, ON OFF 
Extender OFF, ON OFF 
MONI OUT OFF, ON OFF 
FAN Off OFF, ON OFF 
Master Gain OFF, ON OFF 
Black Gamma OFF, ON OFF 
7"VF VF FAN Speed NORM, LOW NORM 
Peak Slice OFF, LOW, MID, HI OFF 
Peak FREQ 8 MHz, 15 MHz 8 MHz 
INCOM Set.1 INC1 MIC Type DYN, ECM, CBN CBN
INC1 MIC Gain –1 dB to +1 dB (in 3 dB increments) 0 dB
INC1 MIC Power ON, OFF ON
INC1 Side Tone OFF, 0 dB to –36 dB (in 3 dB increments) OFF
INC1 PGM MIX ON, OFF ON
INC1 ENG/PROD ENG, PROD ENG
INC1 to CCU ON, OFF ON
INCOM Set. INC MIC Type DYN, ECM, CBN CBN
INC MIC Gain –1 dB to +1 dB (in 3 dB increments) 0 dB
INC MIC Power ON, OFF ON
INC Side Tone OFF, 0 dB to –36 dB (in 3 dB increments) OFF
INC PGM MIX ON, OFF ON
INC ENG/PROD ENG, PROD ENG
CRANE MIC Gain –1 dB to +1 dB (in 3 dB increments) 0 dB
CRANE Side Tone OFF, 0 dB to –36 dB (in 3 dB increments) OFF
CRANE ENG/PROD ENG, PROD ENG
CRANE to CCU ON, OFF ON
MIC Gain MIC1 Gain 60 dB, 40 dB, 0 dB 60 dB
MIC1 AMP 0 dB to –0 dB (in 1 dB increments) 0 dB
MIC Gain 60 dB, 40 dB, 0 dB 60 dB
MIC AMP 0 dB to –0 dB (in 1 dB increments) 0 dB
Table of adjustment setting ranges