Panasonic AG-520F - Manual (Page 15)

15 15
Basic Operation
e
• Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
Connections you’ll need to make.
Playback (Source)
1
Recording (Editing) unit
Insert
pre-recorded
tape. Insert blank tape
with record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode (TUNER:ON only)
Method 1:
Press INPUT on the unit.
Channel Number
LINE
Caution
(Perform operation of steps 4 and 5 on both units at same time.)
STOP
Recording (Editing) unit
OUT
IN
AUDIO
AUDIO IN VIDEO IN
IN FROM ANT.
OUT TO TV
VID EO
Playing (Source) VCR
Copy Your Tapes (Dubbing)
Method 3:
a Press ACTION for MAIN MENU.
b Press to select “TV,” then press
ACTION for SET UP TV screen.
c Press to select “INPUT SELECT,” and
then press to select “TUNER” or “LINE.”
d Press ACTION twice to exit this mode.
Method 2:
Press CH . The display will change as follows.
1 2 3
125 LINE
(CABLE)
69
(TV)
or