Paxar Monarch 6015TM User Manual

Page 2

Advertising

10-Pin Connector

+ (Positive) ends
facing this way

3. Moisten a cotton swab with

isopropyl alcohol and clean the
printhead as shown.

4. Clean the platen roller with a dry

cloth or small brush. You can also
use a cotton swab moistened with
isopropyl alcohol. Turn the platen
roller with your finger and run the
cotton swab or dry cloth across it.
Make sure the platen roller is clean
all the way around.

R e p l a c i n g t h e B a t t e r i e s

Batteries are not included with the
printer.

1. Remove the organizer.

2. Open the battery cover.

3. Insert four (4) AA Rechargeable

(preferred) NiCad, NiMH, or
Alkaline batteries to positive and
negative connectors as indicated.

4. Close the battery cover.

5. Attach the organizer to the printer's

10-pin connector.

T r o u b l e s h o o t i n g

If you cannot fix a problem, call
Technical Support.

Problem

Action

Does not
feed or has a
paper jam.

Remove any jammed
supplies.
Reload supplies.

Does not
print.

Check or replace the
batteries.
Your organizer's
application should
include a query for
the battery voltage.
Refer to the
Programmer's Manual
for more information.

Problem

Action

Light/heavy
printing or
voids in
printing.

Clean the printhead.
Your organizer's
application should
include a print
contrast adjustment.
Refer to the
Programmer's Manual
for more information.

S u p p o r t e d B a r C o d e s

You can program the printer to print the
following bar codes: Codabar,
UPC/UCC/EAN/JAN, Interleaved 2 of 5,
Code 128, Code 39.

S u p p o r t e d F o n t s

The printer supports the following fonts:
Standard (normal and bold), Large
(normal), Reduced (normal and bold),
and Rotated.

S u p p l y S p e c i f i c a t i o n s

Use thermal direct receipt paper.

Width:

2.25 inches (57 mm)

Length:

1.0 inch (25.4 mm)
minimum feed
8.0 inches (203 mm)
maximum feed
600 inches (15,240
mm) per roll

Thickness:

2.7 mils

Roll
Diameters:

Inside: .25 inches
(6 mm) coreless
Outside: 1.5 inches
(38 mm)

P r i n t e r S p e c i f i c a t i o n s

Height:

2.38 inches (60 mm)

Width:

3.38 inches (86 mm)

Length:

8.31 inches (211 mm)

Weight:

0.92 lbs. (0.414 kg)

Shipping
Weight:

1.5 lbs. (0.675 kg)

Power:

Four (4) AA
Rechargeable
(preferred) NiCad,
NiMH, or Alkaline
batteries.

Optional AC Power
Adapter: 120212
(115 VAC) or 120220
(203 VAC)

Battery
Life:

600 inches
(15,240 mm)
without recharge

Operating
Limits:

to 104

to 40

Printhead:

2 inches (51 mm) wide
203 dpi (8 dots per mm)

Printing
Method:

Thermal Direct

Print
Speed:

1.0 inches per second
(for standard receipts)
NOTE: The speed is
dependent on the
application.

Memory:

64K

For more information, call toll free:

1-800-543-6650 (In the U.S.A.)
1-800-263-4650 (In Canada)

www.monarch.com

Platen Roller

Printhead

Advertising