Paradyne 6800 - Manual (Page 330)

COMSPHERE 6800 Series Network Management Systems
A-4 January 1997 6800-A2-GN22-30
•
Depending on the value (y or n) in column o58 of Table A-1,
TYPE: atzo58=y or atzo58=n
PRESS: Enter twice
The software configuration option parameter meanings are as follows:
o7 (o7=y or o7=n) Automatic answer enabled (yes or no).
o12 (o12=y) Transparent Data mode (should be enabled).
o34 (o34=1) Operate as standard modem without error control.
o51 (o51=y or o51=n) CTS controlled by RTS (yes or no).
o58 (o58=y or o58=n) Modem ignores DTR (yes or no).
Locking Option Changes
After the software configuration option parameters have been set, hardware switch S1-2 should be
changed from D to U to lock the options so that they cannot be changed.