ProForm C 525 PFTL49406.1 - Manual (Page 10)

10
11.Tighten four Console Screws (67) into the Left
and Right Uprights (70, 76) and the console as-
sembly.
Start all four Screws, before tighten-
ing them; do not overtighten the Console
Screws.
Tighten all six 3/4” Screws (23) used in step
10; do not overtighten the Screws.
Console Assembly
67
76 70
67
11
12.Slide the Left Handrail Cover (68) up against the
console assembly. Tighten two Cover Screws
(52) into the Left Handrail Cover and the Left
Upright (70);
be careful not to overtighten the
Cover Screws.
Slide the Right Handrail Cover (74) up against
the console assembly. Tighten two Cover Screws
(52) into the Right Handrail Cover and the Right
Upright (76);
be careful not to overtighten the
Cover Screws.
Console
Assembly
52
68
70
76
74
52
12
13. Lower the Uprights (70, 76) as shown.
See the inset drawing. Push the Uprights (70,
76) sideways so that the treadmill Frame (26) is
centered between the Uprights.
Firmly tighten the Upright Bolts (84, 85) on each
side of the treadmill.
76
70, 76
26
26 70
View From Above
Side View 13
85
84