Adding a device manually, Setup > add device, Add snmp device – Patton electronic FORESIGHT 6300 User Manual

Page 36

Advertising
background image

Adding a Device Manually

36

FS6300 NMS User Manual

2 • Discovering Your Network

Adding a Device Manually

To add a single device to the NMS database:

1. Click on SetUp(F) > Add Device at the top of the screen.

Figure 19. SetUp > Add Device

2. The Add SNMP Device window displays.

Figure 20. Add SNMP Device

Enter information for the following fields:

Device IP Address: Enter the IP address of the device you want to add.

Netmask: Enter the netmask for the device IP address. Default = 255.255.255.0

– SNMP Password: Enter the password to access the device.

SNMP Agent Port: Enter the port number where the SNMP Agent is running. Default = 161

Process Add SNMP Device request in the background: Select this box if you want continue with other

operations in the NMS while the discovery process for the device runs in the background.

3. Click Add Device. If the device has been added to the system previously, a message will display that the

node already exists in the database.

Advertising