Panasonic BB-HNP11A - Manual (Page 34)

Operating Instructions
34
Recording Capacity Limit Page
• Default is displayed when you register a camera.
• If you change default by checking [Set to Default] and clicking [OK], the current
settings become as a default.
• If you click [Return to Default], the settings return to a default.
• If you change the capacity to a smaller value than the current capacity, this
software deletes old images. (E.g. if you change the capacity to 200 MB when
you recorded images up to 250 MB, 50 MB old images are deleted.)
Setting Description
Limit Recording
Capacity To limit the capacity, check [Limit the recording capacity] and
set the capacity. Select [Stop recording] or [Delete old images
and keep recording] (by 1 minute) when the capacity is full.