ProForm Crosswalk 395CW 831.299410 - Manual (Page 6)

6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet,
place a mat under the treadmill.
4. Align the hole in the Handrail (1) with the indicated hole
in the Upright (11). Tighten a Handrail Screw (53) into the
Upright and the Handrail at the angle shown in drawing
4b. It may be helpful to lift up and push down on the
Handrail as you thread the Handrail Screw.
Attach the other Handrail to the left Upright (not shown).
1
53
53
11
4a 4b
Bottom View
3. Insert one of the Handrails (1) into the tube at the upper
end of the right Upright (11).
11
1
3
5. Attach the Storage Latch (14) to the left Upright (11) with
two Latch Screws (35). Be careful not to overtighten
the Latch Screws.
35
14
11
5
6