Pentax Optio 33LF - Manual (Page 19)

17
Getting Started
1
Precautions when using an SD Memory Card /
MultiMediaCard
• Make sure the camera is turned off before opening the
card cover.
• SD Memory Cards are equipped with a write-protect
switch. Setting the switch to [LOCK] protects the existing
data by prohibiting recording of new data, deletion of
existing data or formatting of the card.
• The PENTAX website provides a list of SD Memory Cards
and MultiMediaCards that have been checked for
compatibility with the camera. Inquiries on card compatibility can also be
answered by your nearest PENTAX service center.
• The SD Memory Card / MultiMediaCard may be hot when removed
immediately after camera use.
• Do not remove the card or turn off the power while the camera is saving to
the SD Memory Card / MultiMediaCard, displaying images, or connected
to a PC via a USB cable. This could cause data loss or card damage.
• Do not bend the SD Memory Cards / MultiMediaCards or subject them to
violent impact. Keep away from water and store away from high
temperatures.
• New cards or cards used in another camera must be formatted before
use. Refer to “Formatting Cards / Internal Memory” (p.86) for information
on formatting.
• Never remove the SD Memory Card / MultiMediaCard during formatting.
The card may be damaged and become unusable.
• The data on an SD Memory Card / MultiMediaCard may be erased in the
following circumstances. PENTAX does not accept any liability for data
that is erased.
(1) When the user mishandles the SD Memory Card / MultiMediaCard
(2) When the SD Memory Card / MultiMediaCard is placed in a location
with static electricity or electrical interference
(3) When the card is not used for a long time
(4) When the card, the AC adapter, or battery is removed while recording
or reading data on the SD Memory Card / MultiMediaCard
• SD Memory Cards / MultiMediaCards have a limited service life. The
stored data may become unreadable after long periods of disuse. Please
periodically back up important data onto your PC.
• Avoid using or storing cards where static electricity or electrical
interference can occur.
• Do not use or store cards where they may be exposed to sudden
temperature changes, condensation, or direct sunlight.
Write-protect
switch