Paradyne Application Module 9109 OCU-DP - Manual (Page 3)

9109 OCU
POR
T 1
Port 1
Port 2
98-15922
Port 3
Port 4
Port 5
Port 6
POR
T 2
POR
T 3
POR
T 4
POR
T 5
POR
T 6
3
Installing the I/O Card
The I/O card provides the APM with DDS connections. The I/O card inserts directly
behind the APM that it supports. Slot numbers are identical to facilitate correct
installation.
NOTE:
For the 2-port OCU-DP APM, only Port 1 and Port 2 on the I/O card are functional.
1. Remove the I/O card from the shipping box. Handle only by
the top and bottom edges to avoid damaging the card.
2. At the rear of the housing, align the I/O card with the upper
and lower tracks of the slot. Push gently towards the
midplane until it stops and you cannot push the card any
further.
98-15150-02
Rear View
Screws
5-Slot 2-Slot
3. There are two captive screws on the I/O card. Alternately
tighten each screw until both are snug.