Pitney Bowes POSTPERFECT B702 - Manual (Page 20)

2-5 SV60941 Rev. C
• + Date—Press to see the date that will be printed as a part of the meter imprint.
This is usually the current date. You can also advance the date up to a maximum
of 30 days from the current date.
• Date On/Off—Allows you to print the date, omit the date or omit (“duck”) the day.
• Ad—Press to see the name of the ad that will print when the meter is tripped.
Press the key repeatedly to select different ads.
• Inscription (B700 only)—Press to see the current inscription or change the in-
scription.
• Memory Keys 1, 2 , 3 and 4 (B700 only)—Press to select a pre-programmed
meter configuration. A “configuration” specifies a postage amount, ad slogan
number and inscription number. You program the memory keys using the B700's
setup menus.
• Numeric Keys (0-9)—Use these to enter a numeric value for a postage amount
or to select a particular menu choice.
• Clear (C)—Press to clear an entry. You may also use this key along with the
Value/Pieces key to reset the batch count registers to zero.
• Decimal (.)—Press to enter a decimal point. You have the option of entering the
decimal point manually or letting the meter enter it for you. You must always type
a decimal point first when you enter a fractional value such as 15.8¢ (enter this
value as .158).
• $ Available—Press to display the total amount of postage funds remaining.
• $ Used—Press to display the total amount of postage the meter has dispensed
since it was placed in service.
• Refill—Press to begin the process of refilling the meter using the Pitney Bowes
Postage By Phone ® service.
• Enter—Press to accept a selection.
Getting Acquainted • 2