Pioneer CNDV-40R - Manual (Page 59)

57
Chapter 5
Combining and Using Pioneer AV Equipment
❒ With some discs, some buttons may be disa-
bled.
Basic Operation When Pioneer AV
Equipment Is Combined
This section describes how to switch the source
and screen. In addition, a basic operational flow
for each source is also described. The operation
method for each source is almost the same as
the basic operational flow described in this sec-
tion. So study this first.
Switching the source
How to switch the source, and how to switch the
map screen of the Navigation System and audio
equipment screen are described.
1
Press the SOURCE button and switch to
the source you want to operate.
As you press the SOURCE button, the source
is switched and the information plate of each
source appears.
Press the SOURCE button repeatedly to
switch between the following sources:
CD (CD player: AVH-P6400CD) — TV (televi-
sion) — VIDEO (video input) —TUNER
(radio) — XM (XM tuner) — DVD (one disc
only/multi-DVD player) — M-CD (Multi-CD
player) — EXT (External unit 1) — EXT
(External unit 2) — AUX (auxiliary) — CD or
DVD (“NAVI” source)
Depending on the equipment connected, the
source you can select differs.
❒ When the power of AV equipment is off, or
a disc is not set, you may not be able to
select the source. In such a case, turn the
power of the AV equipment on and insert a
disc before switching the source.
2
Adjust the volume using the VOL dial.
Navigation source (“NAVI” source)
When a DVD or CD is played with the built-in
DVD player, the source will be set to “NAVI”
source.
➲ Using the built-in DVD player of your Naviga-
tion System
➞ Page 96
❒ You cannot play a DVD-Video or CD with the
built-in DVD-ROM drive of AVIC-80DVD and
AVIC-88DVD.
In the following cases, the sound source will
not change:
❒ When a product corresponding to each
source is not connected to AV Head Unit.
❒ When no disc is set in AV Head Unit.
❒ When no disc is set in the CD player.
❒ When no magazine is set in the multi-CD
player.
❒ When no magazine is set in the multi-DVD
player.
❒ When the AUX (auxiliary input) is set to off.
❒ When no disc is set in the DVD player (e.g,
SDV-P7).
❒ When the “VIDEO SETTING” is set to off.