Button control guide (listening to the radio), When using overseas, Radio on/ change band – Panasonic SL-CT580V User Manual

Page 6: Select the station, Receive an fm broadcast clearly, Select stereo or monaural fm, Volume control (0–25), Each time you press [mono/st, fm mode, Each time you press and hold [ % city/nor, Press

Advertising
background image

Store the frequencies of up to 30 stations; 20 FM and 10 AM.
1 Slide [HOLD1] in the opposite direction to the arrow to cancel.
2 Press [RADIO/BAND] to turn the tuner on and change the band.
3 Press [TUNING MODE] to display “M”.

4 Press [RECALL, MEMORY].

5 Do each of the following within 10 seconds.

1Press [:, s] or [9, r] to select the frequency.

1

≥Press and hold to scan the stations rapidly.

2Press [RECALL, MEMORY].
3Press [:, s] or [9, r] to select the memory number.

1

≥Press and hold to change incrementally.

4Press [RECALL, MEMORY] to confirm the setting.

Change the frequency step according to the area.
1 Press [RADIO/BAND] to switch on the power.
2 Press and hold [RADIO/BAND] until the step appears.

3 Do each of the following within 10 seconds.

1Press [:, s] or [9, r] to select the step.

1

Each time you press [:, j] or [9, i]

2Press and hold [RECALL, MEMORY] until the frequency appears to

confirm the step.

To return to the previous frequency step

Repeat the above procedure.
≥Changing the step erases the stations you stored in memory.

S-XBS

S-XBSr

6

RQT8124

Button control guide (Listening to the Radio)

Set to “MONO” when there is noise during FM
reception.
Sound becomes monaural, but noise is reduced.

Each time you press [MONO/ST,
FM MODE]

No display

(stereo)

MONO

U0.2

U0.1

E

FM 0.2 MHz,
AM 10 kHz
(original setting)

FM 0.1 MHz,
AM 10 kHz

FM 0.05 MHz,
AM 9 kHz

FM

U0 2

When using overseas

M

FM

1

98 00

M

FM

1

06 00

1

M

FM

1

07 10

1

Set to “CITY” if reception is poor or if there
is interference from another station.

Each time you press and hold
[
%CITY/NOR]

CITY

Radio on/

Change

band

RADIO/BAND

< RADIO >

Press.

Select the

station

9, i

< 9 >

(

Forward)

:, j

< : >

(Backward)

Press.

≥Press and hold to scan the stations rapidly.
≥“TUNED” appears when tuned.
≥When “M” is displayed, press [TUNING MODE]

to cancel it.

No display
(canceled)

To obtain good reception

AM

Try various directions to obtain
optimum reception.

FM

The headphone/earphone cord is also the FM antenna, so extend
it instead of leaving it coiled.

Receive

an FM

broadcast

clearly

%CITY/NOR

Select

stereo or

monaural

FM

MONO/ST,

FM MODE

Boosts the

bass

≥The effect may differ with different kinds of

music.

No display

(canceled)

Enhanced

S-XBS

Sound

quality

EQ

Each time you press [EQ]

∫, OPR OFF

< RADIO >

Turn off

Storing stations in memory

Listening to a memorized station

Erasing a memorized station

1 Perform steps 1 to 3 for “Storing stations in memory” (

above).

2 Press [:, s] or [9, r] to select the memorized station.

≥Press and hold to change incrementally.
≥“TUNED” appears when tuned.

3 Adjust the volume.

1 Perform steps 1 to 3 for “Storing stations in memory” (

left).

2 Press [:, s] or [9, r] to select the memorized station to

be erased.
≥Press and hold to change incrementally.

3 Press [RECALL, MEMORY].

The frequency number flashes.

4 Do each of the following within 10 seconds.

1Press and hold [RECALL, MEMORY] until “- - - -” flashes.

2Press [RECALL, MEMORY].

M

FM

1

- - - -

i, VOL

(Increase)

j, VOL

(Decrease)

Volume

control

(0–25)

Press.

HOLD

(Function lock)

HOLD 1

<

HOLD >

Slide in direction of arrow.

(Slide in opposite direction to cancel.)

M

FM

1

07 10

1

FM

07 10

1

Press.

(Main unit)

Press and hold.

(Remote control)

≥The unit and remote control each have

independent HOLD switches.

≥Press again to change the band.

Each time you press the button:
FM

() AM

References to the remote control apply only to

.

< > indicates the buttons for the remote control.

SL-CT582V

Advertising
This manual is related to the following products: