Locking the phone – Panasonic EB-G60 User Manual
Page 22
Basic Operation
11
Locking the Phone
With the Phone Lock enabled you will be restricted to answer incoming calls
and make emergency calls. The Phone Lock Code is factory set to 0000.
1
From Idle press
<
and select (Applications >) Phone Setting >
Security > Phone Lock. Press
<
2
From the submenu select Status and press
<
3
Select On and press
<
4
Enter the 4-digit code and press
<
The lock icon ( )will be displayed in the primary selection area.
Unlocking the Phone
Enter your Lock Code. The lock icon will be replaced by OK. Press
<
to
confirm.
As long as the Phone Lock is enabled, whenever you turn on the phone, the
Lock Code will need to be re-entered to activate the phone.
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1
From Idle press
<
, select (Applications >) Phone Setting >
Security > Phone Lock. Press
<
2
From the submenu select Status and press
<
3
Select Off and press
<
4
Enter the 4-digit code and press
<
Changing Phone Lock Code
You should change your phone lock code to a 4-digit number of your own
choice.
1
From Idle press
<
and select (Applications >) Phone Setting >
Security > Phone Lock. Press
<
2
From the submenu select Change Code and press
<
3
Enter the Old Unlock Code and press
<
4
Enter a New Unlock Code and press
<
5
Re-enter the New Unlock Code to confirm. Press
<
to complete the
change.
G60 FINAL No3 0709.fm Page 11 Wednesday, July 9, 2003 10:50 AM