Panasonic DP-180 - Manual (Page 27)

27
F
a
csimi
le
F
e
at
u
res
■ Duplex (2-Sided) Receiving
Duplex Print Fax Parameter No. 95 (DUPLEX PRINT) set to:
• Duplex Print = Valid (Default Position is "Invalid") (See page 142)
(See Note 6)
NOTE 3. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
4. If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No. 22 to "Invalid". (See page 140)
5. The machine cannot print the received documents from the Sheet Bypass.
6. If the machine detects memory overflow while receiving in the Duplex Print setting, it will
switch from duplex to single side printing.
Rings
Lift the handset
1
2 4 3
Press
then hang up the
telephone.
Start receiving the
document(s).
START
Remove any documents
from the ADF.
Automatic Reduction
Based on the document length, your machine will automatically calculate the
suitable reduction ratio (70% to 100%).
Set Parameter No. 24 (PRINT REDUCTION) to "Auto". (See page 141)
Fixed Reduction
Pre-determine the reduction ratio from 70% to 100% in 1% steps.
a) Set Parameter No. 24 (PRINT REDUCTION) to "Fixed".
b) Set Parameter No. 25 (REDUCTION RATIO). (See page 141)
Ex: A4 to A4 96%
A4 to Letter 90%
Letter to Letter 96%
Legal to Letter 75%
Replenish the recording paper or the toner.
The document(s) stored in memory are
automatically printed.
2
Duplex Print Sending Station
(Letter or A4 Originals)