Features and controls, Master on/off switch, Multifunction light – Polaris 2010 Breeze User Manual

Page 32

Advertising
background image

30

FEATURES AND CONTROLS

Master On/Off Switch

The master switch is located under the seat

on the passenger side of the battery box.

The switch must be in the ON position (for-

ward) for the vehicle to operate. The switch

must be moved to the OFF position for:
• Towing the vehicle (or severe motor

damage will occur)

• Performing battery maintenance or

replacement (to disconnect all power

from the batteries to the vehicle)

• Storing the vehicle (to prevent battery

discharge) for more than 5 days.

NOTICE:

Failure to turn off the Master On/Off switch when storing the

vehicle for a prolonged period can cause battery damage.

NOTICE: Failure to turn off the Master On/Off switch before performing

maintenance on the electrical system can cause damage to the

vehicle’s electrical components.

Multifunction Light

The green LED light, located on the motor

controller will illuminate, flashing initially

then remain on while the key is turned to the

On position AND the Master On/Off switch,

located under the seat, is in the On position.

The multifunction light is also your source

for trouble-shooting information in the

event that any electrical issues arise with the

vehicle. In normal operation the LED will

remain steady green. If a problem is

detected the light will flash, in different

sequences to indicate the type of issue to

investigate. Please refer to the Multifunction

Light Trouble-shooting Guide on page 31.

OFF

ON

Master On/Off Switch

Multifunction Light

Advertising
This manual is related to the following products: