Panasonic KX-T2375ALW - Manual (Page 19)

Advanced Operation
19
“
To store in a LOWER memory location
1 Press (PROGRAM) .
2 Enter a phone number, up to 22 digits.
≥ If you enter a wrong number, press
(PROGRAM)
and start again from step 1.
3 Press (AUTO/LOWER) .
4 Press one of the one-touch auto dial
buttons.
≥ A long beep sounds.
≥ The unit will return to the standby mode.
≥ If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift
the handset and place it on the cradle to return to the standby mode, and
start again from step 1.
≥ If a pause is required for dialling, press (PAUSE) where needed. Pressing
(PAUSE)
counts as one digit (p. 21).
To erase a stored number
1 Press (PROGRAM) .
2 If the phone number is in an UPPER
memory location, press the one-touch
auto dial button for the phone number
to be erased.
OR
If the phone number is in a LOWER
memory location, press
(AUTO/LOWER) ,
then press the one-touch auto dial
button for the phone number to be
erased.
≥ A long beep sounds.
≥ The unit will return to the standby mode.
≥ When using the Dial Lock (p. 25) or Call Restriction feature (p. 26), you cannot
erase a phone number in the EMERGENCY button.
PQQX13367ZA-BM03 02.1.9 8:59 AM y [ W 19