Pioneer dvr-rt500 - Manual (Page 31)

Getting started 04
31
En
EXTERNAL AUDIO INPUT
The audio mode for the audio input jack can be se-
lected, choosing either stereo or monaural.
Select “EXTERNAL AUDIO INPUT” and select from the
list below.
STEREO:
The sound is treated as stereo sound.
L CH:
The sound is treated as the monaural sound of the
left channel.
R CH:
The sound is treated as the monaural sound of the
right channel.
SAP (Second Audio Program)
This unit is fitted with a SAP broadcast system that
enables you to switch to a second audio program while
viewing a selected channel.
This function applies only when the program is broad-
cast in multiple languages through the SAP broadcast
system.
Select “SAP” and select “ON” to use SAP, and to not use
it, select “OFF”.
Listening to SAP
When the unit is turned on or a channel selection is
made, make certain the letters “SAP” appear on the
screen. This means that “Second Audio Program”
broadcasting is available.
Setting the recording
This section describes recording settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “
REC SETUP”. For the procedure, see steps 1
to 3 in “Using the SETUP MENU” on page 23.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
REC SETUP
INITIAL REC TO
INITIAL REC MODE
AUTO CHAPTER
INDEX PICTURE
SETUP MENU
ENTER/
SELECT RETURN SETUP ENTER BACK END
DVD
SP
10MIN
0 SEC
SELECT
INITIAL REC TO
You can select the recording media that is first dis-
played in the item “REC TO” on the timer recording
screen.
Select “INITIAL REC TO” and select “DVD” or “VCR”.
INITIAL REC MODE
You can select the recording mode that is first displayed
in the item “REC MODE” on the timer recording screen.
Select “INITIAL REC MODE” and select XP, SP, LP, or SLP.
Note
• For the DVD recording mode, see page 52. And for
the VCR recording mode, see page 48.
AUTO CHAPTER
You can automatically make chapter marks on the DVD
to be recorded.
Select “AUTO CHAPTER” and select the interval
between chapter marks from the list below.
OFF: Automatic chapter marking is not used.
5 MIN: The interval is set to 5 minutes.
10 MIN: The interval is set to 10 minutes.
15 MIN: The interval is set to 15 minutes.
30 MIN: The interval is set to 30 minutes.
INDEX PICTURE
You can set the time that the thumbnail image is
registered in the title menu of DVD-RW (VR mode).
Select “INDEX PICTURE” and select from the list below.
0 SEC:
The image of a recording start point is registered.
1 MIN:
The image 1 minute after a recording start is
registered.
3 MIN:
The image 3 minutes after a recording start is
registered.
Note
• You cannot select the thumbnail image for Video
mode.
2D30901B_En_22_32 27/9/04, 18:13 31