Panasonic DMC-G5 User Manual
Page 92
- 92 -
Recording
5
Focus on the subject and take a picture.
A Auto Bracket indication
•
If you press and hold the shutter button, the number of pictures that you
set is taken.
•
The Auto Bracket indication blinks until the number of pictures that you set is taken.
•
The picture count is reset to [0] if you change the Auto Bracket setting or turn the camera off
before all the pictures that you set are taken.
∫
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1
Select [Auto Bracket] in the [Rec] menu.
2
Touch [Single/Burst Settings], [Step] or [Sequence].
3
Touch the setting.
•
You can take one picture at a time when set to [
].
•
You can continuously take pictures up to set numbers when set to [
].
•
Exit the menu after it is set.
Note
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
•
The exposure may be compensated incorrectly, depending on the brightness of the subject.
•
When taking pictures continuously using Auto Bracket with [i.Resolution] set to [EXTENDED], it may
take time to record all the set number of pictures.
•
Auto Bracket is disabled in the following cases.
–
[Glistening Water]/[Glittering Illuminations]/[Soft Image of a Flower] (Scene Guide Mode)
–
[Miniature Effect]/[Soft Focus]/[Star Filter] (Creative Control Mode)
–
When White Balance Bracket is set.
–
When recording motion pictures
–
When recording using the flash
–
When [HDR] is set to [ON]
Item
Settings
Item
Settings
[Single/Burst
Settings]
[
] (single)
[Sequence]
[0/
`/_]
[
] (burst)
[
`/0/_]
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
AFS
AFS
A