Specifications, Highlights – Philips SLV3220 User Manual
Page 2
Issue date 2010-12-08
Version: 3.0.10
12 NC: 9082 100 05002
EAN: 87 10895 90448 3
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Specifications
SLV3220/05
Wireless TV link
Highlights
Watch any device on a second TV
The wireless link uses standard SCART and cinch
plugs that are used by almost every brand of audio/
video device. If your device has one of these standard
connectors it will work with the wireless link
Connect 2 devices
The easy way to switch between any two devices
without having to reconfigure your entire home
cinema set-up. The wireless TV link has two separate
inputs, each with its own SCART connector,
enabling you to connect two A/V source devices at
the same time.
Works with DVD and many more
Extend your possibilities for viewing movies, sports
events, live performances and a range of TV channels
anywhere in your home. The wireless TV link is
suitable for transmission of AV content of all brands
of PayTV and Pay-per-View decoders, satellite
receivers, set-top boxes, DVD players, VCRs and
camcorders.
Works with almost all brands
The wireless link uses standard SCART and cinch
plugs that are used by almost every brand of audio/
video device.
Operates in a closed cabinet
If you store your audio/video devices in a cabinet,
you cannot operate these devices with a normal IR
remote control. The Philips wireless remote control
link allows you to operate these devices when the
cabinet doors are closed thanks to an RF-based link
that picks up the infrared signals of a remote control
and translates them into RF. The receiver unit then
translates them back to IR.
One touch access to 2 devices
There's no need to swap cables at the transmitter to
view any video device on the second TV. Simple
press the input selection button to switch from input
device.
Wireless means no drilling
A 2.4 GHz wireless link between the receiver and
transmitter means you don't have to lay cables or
drill holes through walls.
Wireless passes through walls
There's no need to buy or rent duplicate A/V
equipment. The wireless RF system extends your
possibilities for viewing DVD movies and your
favourite Satellite or TV channels anywhere in your
home. With a range of up to 30 metres inside the
house, it delivers high-quality video and stereo audio
no matter where your second TV is located.
Tuner/Reception/Transmission
• Antenna location: Picture and Sound: Internal, RC
Extender: Internal
• Frequency range: picture and sound: 2.4 GHz RC
extender: 433 MHz MHz
• TV system: PAL, SECAM
• Typical range indoors: 15-30 m
• Typical range outdoors: 100 m
• Remote control extender
• Supported IR carrier frequency: 32-40 KHz
Accessories
• AC/DC Adapter: 2 x 9 VDC, 300 mA
• SCART duplicator: 2pcs, on SCART input cables
Dimensions
• Receiver dimensions (W x H x D):
175 x 45 x 115 mm
• Temperature (operation): +5 ºC to +35 ºC
• Transmitter dimensions (W x H x D):
175 x 45 x 115 mm
Power
• Power consumption: 7 W
• Power supply: AC/DC Adapter, 220-240 V
Transmitter
• SCART 1: CVBS in, Audio L+R in
• SCART 2: via included SCART to RCA converter
cable
• RCA: CVBS, Audio L, Audio R
Receiver
• SCART out: CVBS out, Audio L+R out
•