Chapter 5: webpam, Log-in to webpam, Regular connection – Promise Technology FastTrak TX2300 User Manual
Page 49: Secure connection, Regular connection secure connection
43
Chapter 5: WebPAM
WebPAM is a RAID management software application. If you have not installed
WebPAM on your PC, see “WebPAM Installation” on page 14.
Log-in to WebPAM
Double-click on the WebPAM icon on your desktop (right). Or,
1.
Launch your Browser.
2.
In the Browser address field, type in the IP address of the Host PC, as
explained below.
If you did not choose the External Security option during WebPAM
installation (see page 18), use the Regular connection.
If you chose the External Security option during WebPAM installation, use
the Secure connection.
Regular Connection
•
WebPAM uses an HTTP connection . . . . . . . . . . . . . . . . . . . . .http://
•
Enter the Host PC’s IP address . . . . . . . . . . . . 127.0.0.1 or localhost
•
Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080
•
Add to launch WebPAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . /promise
Together, your entry looks like this:
http://127.0.0.1:8080/promise or https://localhost:8443/promise
Secure Connection
•
WebPAM uses a secure HTTP connection . . . . . . . . . . . . . . .https://
•
Enter the Host PC’s IP address . . . . . . . . . . . . 127.0.0.1 or localhost
•
Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443
•
Add to launch WebPAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . /promise
Together, your entry looks like this:
https://127.0.0.1:8443/promise or https://localhost:8443/promise
•
•
•
•
•
Utility Configuration (page 54)
•
•
•
•
•
•