Philips STERILISER SCF225 - Manual (Page 7)

Never place items on top of the appliance when it is in use.
automatic shut-off
This ap)pliance is equipped with an electronic shut-off function that automatically switches the
appliance off after 10 minutes, when the sterilising process is finished.
Before first use
1 Clean all detachable parts (see chapter ‘Cleaning’).
2 Adjust the length of the mains cord by winding part of it round the cord storage brackets in
the base of the appliance.
 Put the mains plug in the wall socket.
preparing for use
Filling the water reservoir
1 Remove the container from the base
2 Fill the measuring cup up to the required level (90ml).
Do not use less water than 90ml to prevent the appliance from boiling dry.
 Pour the water into the water reservoir (onto the heating element). (Fig. 2)
 Place the container on the base. (Fig. )
using the appliance
Sterilising
1 Clean all objects that have to be sterilised.
2 Make sure that there is enough water in the water reservoir (see chapter ‘Preparing for use’).
 Place the bottles upside down onto the pins inside the container. (Fig. )
The bottle in the middle can be placed on the centre pillar or can be put in the middle without
the centre pillar.
The container can contain 9 large bottles or 6 wide-neck bottles.
The centre pillar can be used for the screw rings. When you use the centre pillar for screw rings,
you can sterilise 8 large bottles or 6 wide-neck bottles.
 Fill the lower basket and put it on the centre pillar. (Fig. 5)
This is only possible if you have filled the container with small bottles. If you have filled the container
with large bottles, you cannot use the lower basket.
Make sure that the objects inserted in the container do not touch the heating element.
5 Fill the upper basket and place it on the rim of the container. (Fig. 6)
6 Put the lid on the container. (Fig. 7)
7 Press the on/off button. The power-on light goes on to indicate that the appliance is
operating. (Fig. 8)
The sterilising process takes 10 minutes. At the end of this process, the appliance switches off
automatically and the power-on light goes out. Always let the appliance complete the entire 10-
minute sterilising process.
8 Let the appliance cool down for approx.  minutes before you remove the lid.
9 Remove the lid.
,
-
-
-
EngliSh 7