Pentax Optio 555 - Manual (Page 124)

122
6
Edi
tin
g /
Setti
ng
s
How to recall the [ B Set-up] menu
You can register the functions you use most frequently on the four-way
controller. The functions can then be set directly by pressing the four-
way controller without displaying the [Rec.Mode] menu.
1
Select [Fn Setting] on the [
B
Set-up] menu.
2
Press the four-way controller (
5
).
The Fn Setting screen will be displayed.
3
Use the four-way controller (
23
) to choose the key
where you want to register a function.
4
Use the four-way controller (
45
) to choose the
function you want to register.
If you do not want to register a function, select Off.
5
Press the OK button twice.
The camera is ready to capture or play back images.
Registering Functions
Registering a function
• Only one function can be registered on each key of the four-way
controller.
• You can choose from the following 12 functions: Recorded Pixels,
Quality Level, White Balance, Focusing Area, AE Metering,
Sensitivity, Flash Exposure Compensation, Digital Zoom, Instant
Review, Sharpness, Saturation Contrast.
• In the default setting, a negative level of Flash Exposure
Compensation is registered for ( 4 ) and a positive level of Flash
Exposure Compensation is registered for ( 5 ).
• If the Flash Exposure Compensation is registered to either ( 2 ) or
( 3 ), levels are compensated positively for ( 2 ) and negatively for ( 3 ).
Menu / Fn button
R e c . M o d e
W i d e
AWB
A u t o
Q u a l i t y L e v e l
W h i t e B a l a n c e
F o c u s i n g A r e a
A E M e t e r i n g
S e n s i t i v i t y
Exit 1 / 3 MENU OK OK
2592 1944 R e c o r d e d P i x e l s
Four-way controller
OK button