Maintenance and lubrication, Recoil housing – Polaris Magnum 330 User Manual
Page 110
Advertising

107
MAINTENANCE AND LUBRICATION
Recoil Housing
To prevent possible engine
damage, always drain the recoil
housing (1) after operating the
ATV in very wet conditions.
This should also be done before
storing the ATV.
Water will enter the recoil
housing if the starter handle is
disengaged from the rope guide
when under water.
The drain screw is located at the bottom of the recoil housing. Use a
wrench to remove the screw. Be sure to reinstall the screw after
draining the housing.
NOTE: Do not open the crankcase drain unless the engine has
ingested water. On 4-cycle engines, some engine oil will be lost if
crankcase drain is opened.
1
Advertising
This manual is related to the following products: