Panasonic CY-BT200U - Manual (Page 28)

28
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only
by qualified personnel. Please refer the checking and the
repair to professionals. Panasonic shall not be liable for any
accidents arising out of neglect of checking the unit or your
own repair after your checking.
Warning
¡ Do not use the unit in an irregular condition, for exam-
ple, without sound, or with smoke or a foul smell, which
can cause ignition or electric shock. In case that such
conditions occur, immediately stop using this unit and
consult your dealer.
¡ Never try to repair the unit by yourself because it is dan-
gerous to do so.
Problem Possible cause a Possible solution
Reconnection failed
With regard to some devices, reconnection cannot be automatically performed.
● Turn off the power of the Bluetooth-ready device, and then turn on the power of the
device again.
The Link key of the Bluetooth-ready device is different from that of this unit.
● Try to establish the pairing again. If the pairing was not successfully established,
delete “Panasonic BT200” from the pairing list of the Bluetooth-ready device.
■
Common