Palm 700w - Manual (Page 20)

12 Using Your Treo 700w Smartphone
CHAPTER 1 Setting up your smartphone and computer
Making your first call
We recommend that you charge your Palm Treo 700w smartphone for a
full 3.5 hours (or until the indicator light is solid green) before using it
for the first time.
1. Turn on your phone (see “Turning your phone on and off” on page
11).
2. If you do not see your Today screen,
press Phone/Send
.
3. If you have not activated your phone,
follow these steps to do so:
• Use the number pad on the keyboard
to enter
* 228 (these numbers appear
on the ZRRC letter keys).
• Press Phone/Send to dial.
• Follow the voice prompts to activate
your phone. A service provisioning
message appears.
• Wait a few minutes until you see the Programming Successful!
message, and then press Dismiss
(left action key).
Tip
The Dial Lookup list
might appear while
you are dialing a
number. Continue
entering numbers to
place the call. For
more info on the Dial
Lookup list, see
“Dialing by contact
name” on page 41.