Pyramid Technologies TimeTrax Mobile - Manual (Page 6)

4
PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
LOGGING INTO THE SOFTWARE FOR THE FIRST TIME
At this point, the Reference Guide and
online software wizards will walk you
through steps to get you up and running.
They will also teach you how to set the
time and date on the terminal, create
your employee database, print reports
and manage your time and attendance.
USING THE SOFTWARE AND REFERENCE GUIDE
The “Reference Guide” can be accessed and printed from the Log In
screen as well as the software toolbar by selecting the ICON below.
You may also locate the Reference Guide from the software by selecting
Help and Reference Guide or by accessing our website
http://pyramidtechnologies.com/ProductManuals/default.asp.
Click the “Reference Guide” ICON to open the electronic PDF file of
the Software Users Guide. You will see complete steps and full directions
on how to use the Pyramid TimeTrax Software. The guide is always available
on the software screen toolbar. In addition, you can print this file out or
save it to your PCs hard drive. Note: Adobe PDF Reader is required to view
the reference guide and can be downloaded from http://www.adobe.com.
If the recorder is connected correctly, the
Initial Communication Form will appear
with the message “Recorder Found”. If not,
check your cable connections as per the
installation diagram and click the
ReConnect button.
When the program is launched, you are
presented with the LOGIN screen shown.
The temporary User Name is “Admin”
The temporary Password is “PTI”.
PTI is case sensitive and must be
entered as directed.
Enter this information and click the
LOGIN button in the center of the screen.