Panasonic SLV-SE700B User Manual
Page 88
88
Troubleshooting
Syn
c
h
ro
n
iz
ed
Reco
rd
in
g
The ENR SYNCHRO
button turns off while
recording or does not go
back to recording standby
mode.
• The tape has reached its end. Insert a new tape and press ENR
SYNCHRO again.
The Synchronized
Recording function does not
work.
• The connected equipment was not turned off.
Turn off the connected equipment and press ENR SYNCHRO
again.
• There was a power failure. Press ENR SYNCHRO again.
The programme recorded
with the Synchronized
Recording function is
incomplete.
• If the settings for timer recordings and Synchronized Recording
overlap, the programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.
• There was a power failure. Press ENR SYNCHRO again.
Ca
na
l P
lus
You cannot set the channel
as the Canal Plus in the
REGLAGE DES CHAINES
menu.
• Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
the OPTIONS-2 menu is set to DECODEUR (see page 79).
You cannot watch the Canal
Plus programme when the
VCR is in standby mode.
• Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
the OPTIONS-2 menu is set to DEOCEUR (see page 79).
• Make sure the Canal Plus Scart cable is plugged securely.
The Canal Plus programme
is always recorded
scrambled.
• Make sure the Canal Plus Scart cable is plugged securely.
• Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in
the OPTIONS-2 menu is set to DECODEUR (see page 79).
• Check that this channel is set as Canal Plus in the REGLAGE DES
CHAINES menu (see page 37).
Symptom
Remedy