Panasonic AJ-D215P - Manual (Page 15)

– 15 –
Viewfinder displays
SCENE data MARK display
AUDIO (yellow): This is not used in this system.
TALLY (red): This lights during recording. It flashes as the tape is
approaching the recording position from unloading or
when trouble has occurred.
STBY (green): This is not used in this system.
GAIN (yellow): This lights when the camera gain is increased.
BATT (yellow): This flashes when the battery charge has dropped.
VTR (yellow): This lights or flashes when trouble has occurred in the
VTR.
LED displays
TALLY AUDIO STBY
GAIN BATT VTR
Character displays
Lens f-value display
Battery voltage display
Gain display
(this appears when the gain is selected)
Audio CH1 level meter
Remaining tape display
Color temperature display
(this remains displayed in the ATW mode)
Time code display
Electronic shutter speed display
(this appears when the shutter speed is selected)
----------+++++ 120 min F2.8
----------+++++ M4400 14.6V
SHUTTER 1/100 0 dB
TCG 00:00:00:00 MARK 1
Audio CH2 level meter
O
These displays appear when the CHARACTER switch at the front of
the viewfinder is set to ON.
O
Each individual display can be turned off by setting the corresponding
menu item.
O
When the mode check switch has been pressed, the current statuses
are displayed regardless of whether the individual displays have been
set ON or OFF using the corresponding menu items or whether the
CHARACTER switch is ON or OFF.
O
The color temperature display in the ATW mode and the SCENE data
MARK will appear even when the CHARACTER ON/OFF switch is at
the OFF position.