Fit the receiver collar – Petsafe In-Ground Cat Fence Extra Receiver User Manual

Page 6

Advertising
background image

6 www.petsafe.net

Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar is
important for effective training. The Contact Points must have direct
contact with your cat’s skin on the underside of his neck.

To assure a proper fit, please follow these steps:
1. Make sure that the batteries are not installed in the

Receiver Collar.

2. Start with your cat standing comfortably (D).
3. Centre the Contact Points underneath your cat’s

neck, touching the skin. If your cat has a long or
thick coat, use the enclosed long Contact Points to
reach through the hair.
Note: It is sometimes necessary to trim the hair around
the Contact Points to make sure that

D

contact is consistent.

4. Check the tightness of the Receiver Collar by inserting one finger between the

end of a Contact Point and your cat’s neck. The fit should be snug but not
constricting (E).

5. Allow your cat to wear the collar for several minutes then recheck the fit. Check

the fit again as your cat becomes more comfortable with the Receiver Collar.

Advertising