Philips BDP2500/12 - Manual (Page 17)

Note
To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other •
devices connected to TV. Refer to the TVs/devices manual for details.
One-touch play
1
Press the STANDBY button to turn on this product.
The TV (if supports one-touch play) automatically turns on and switches to the correct
»
video-in channel.
If a disc is loaded in this product, disc play automatically starts.
»
One-touch standby
1
Press and hold the STANDBY button on the remote control for more than 3 seconds.
All the connected devices (if the device supports one-touch standby) automatically switch
»
to standby.
Note
Philips does not guarantee 100% interoperability with all HDMI CEC devices. •
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc compartment. •
Do not touch the disc optical lens inside the disc compartment. •
1
Press to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press to close the disc compartment and start disc play.
To view disc play, turn on the TV to the correct viewing channel for this product. •
To stop disc play, press • .