Polycom KH 458 - Manual (Page 15)

Interface Implementation
PN: 1725-36136-001_E.doc 15
The FCN + [number] and LINE + [number] labels represent the key
sequence on the handset mapped to the corresponding key on the
desk set.
The handset displays a
LINE icon that corresponds to each line key.
The voicemail icon displays for voice mail/ FCN + 6 . See the Handset
Icons section above for details.
The handset function menu default settings are shown for each
corresponding sequence on the diagram above and in the table below;
these may be changed as described above in Function Menu
Programming. Some of these functions (Mute, Redial, Forward, etc.)
are activated by softkeys or
FCN menu options on the SpectraLink
6000 and SpectraLink 8020/8030 Wireless Telephones.
FCN + 1
MUTE
FCN + 2
FWD
FCN + 3 FCN + 4
FCN + 5
CNF
FCN + 6
MSG
FCN + 7
REDL
FCN + 8
TRANS
FCN + #
SPCL
FCN + *
(Cancels out of the handset
display)
Program Eclipse PBX and handsets
Program the Inter-Tel Eclipse PBX for use with the Wireless
Telephone System using the Eclipse Database Programming software
that is loaded on your programming PC.
Copy settings from a wired set
If possible, copy the settings from an existing Display Phone with
similar features and keys to create a “template” handset. Once this is
done, you can program additional options on one handset, then copy
the programming to other handsets or groups of handsets.
Station features for handset
Program the features and keys on the handset in the Individual
Station Programming area on your programming PC. Program the
following as required for the parameters required on the handsets:
Account Codes, Mailboxes, Miscellaneous Flags, Miscellaneous Port
Information, Miscellaneous Station Information, Programmable Keys,