Panasonic DMC-LZ5 - Manual (Page 95)

Others
95
VQT0U87
∫ TV, PC and printer
1: The picture does not appear on the
television.
• Is the camera connected to the TV
correctly?
• Set the TV input to external input mode.
2: The display areas on the TV screen
and the camera’s LCD monitor are
different.
Depending on the TV model, the area
display may be smaller so the picture
may be stretched horizontally or
vertically and the top and bottom or left
and right of the picture may be cut off
when it is displayed. This is due to the
TV specifications and is not a
malfunction.
3: The motion pictures cannot be played
back on a TV.
• Are you trying to play back the motion
pictures by directly inserting the card in
the card slot of the TV?
– Connect the camera to the TV with
the AV cable (DMC-LZ5)/video cable
(DMC-LZ4/DMC-LZ3) (supplied) and
then play back the pictures on the
camera.
4: The picture cannot be transferred
when the camera is connected to a
PC.
• Is the camera connected to the PC
correctly?
• Is the camera recognized by the PC
correctly?
• Set [USB MODE] to [PC]. (P23, 80)
5: The card is not recognized by the PC.
(The built-in memory is recognized.)
• Disconnect the USB connection cable.
Connect it again while the card is
inserted in the camera.
6: The picture cannot be printed when
the camera is connected to a printer.
• Does the printer support PictBridge?
– You cannot print pictures with printers
which do not support PictBridge.
(P82)
• Set [USB MODE] to [PictBridge (PTP)].
(P23, 82)
7: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
∫ Others
1: An unreadable language was selected
by mistake.
• Press [MENU/SET], select the [SETUP]
menu icon [ ] and then select the [ ]
icon to set the desired language. (P23)
2: The setting for the auto review
function is disabled.
• Are you taking pictures using auto
bracket (P44)? Is the camera in burst
mode (P46) or motion picture mode
[
] (P55)? Is [AUDIO REC.] set to
[ON] (DMC-LZ5) (P66)?
– In these cases, you cannot set the
auto review function in the [SETUP]
menu.
3: A red lamp sometimes turns on when
the shutter button is pressed halfway.
• In dark places, the AF assist lamp (P67)
lights red to make it easier to focus on a
subject.
VQT0U87ENG.book 95 ページ ２００５年１２月２７日 火曜日 午後７時１２分