Philips CD140 User Manual
Page 24
Use more of your phone
22
5.5.9
How to set the auto
prefix
The maximum length of an
auto prefix number is 10 digits.
Once the number is set, it will
be automatically inserted at the
beginning of each number that
will be dialled.
Press ,
Enter the detect digit where
length of detect digit cannot
be more than five digits
Press
Enter the auto prefix
number
Press
to save the settings
5.5.10 How to change the
master PIN
The master PIN is a 4-digit PIN
for handset registration and
reset of your phone. Default
master PIN is 0000.This PIN is
also used to protect the
settings of your handset.Your
handset will prompt you
whenever the PIN is required.
Note
The default product PIN code
is preset to 0000. If you change
this PIN code, keep the PIN
details in a safe place where
5
4
3
2
1
Note
Number of available recall time
options vary by different
countries.
Press
to save the settings.
5.5.7
How to select dial
mode
This dial mode setting is
country dependent . Pulse
mode may not be available in
some countries.
Press
Press
•
The current settings are
displayed.
Press
for pulse mode
or
for tone mode
Press
to save the
settings.
5.5.8
How to turn
on/turn off the key
tone
Press
If the key beep is turned on
before, press
to turn off
the key tone
Press
to save the
settings.
•
The keypresses thereafter will
not be heard.
3
2
1
4
3
2
1
4