Panasonic KX-TD1232 - Manual (Page 76)

1.7 Useful Features
1-68 Operations
• In the Verify-All mode, you must always enter a pre-assigned account code when making an
outside call. In the Verify-Toll mode, you can enter a pre-assigned account code only when
you need to override toll restriction.
• You do not need to make an account code entry when receiving incoming calls.
• You can clear and re-enter a number by pressing “
” or the FWD/DND button while
entering an account code.
• An account code can be stored into Memory Dialing (“One-Touch Dialing”, “Pickup
Dialing”, “System/Personal Speed Dialing”, “Call Forwarding — to Outside (CO) Line”).
To store an account code, “
” must be entered before the account code.
Example (Pickup Dialing):
— [Off-hook] [742] [Line Access Code] [ ] [Account Code] [Phone Number] [#]
[On-hook]
• If an entered account code does not match the pre-assigned account code in the verify-all
mode, when making an outside call, a reorder tone is heard.
• An account code has 4 digits (0 through 9). FLASH, PAUSE, etc. cannot be used.
• See the Installation Manual, Section 3, “Station Message Detail Recording (SMDR)”.
• See the Installation Manual, Section 3, “Account Code Entry”.
• See the Installation Manual, Section 3, “Toll Restriction Override by Account Codes”.
PT
! !
☞