Panasonic EB-X300 User Manual
Page 96
Phone Menu 93
Codes
Change phonecode:
The phonecode is used for the SIM lock, which protects the
phone from being used with a SIM other than yours.
From Phone Menu
1.
4
Security
A
(Select)
2.
4
Codes
A
(Select)
3.
4
Change phonecode
A
(Select)
4. Enter a new phonecode
A
(OK)
5. Enter the new code to verify
A
(OK)
PIN Control:
The PIN protects your SIM against unauthorised use. If you
enable the PIN, you will be prompted to enter the PIN every time
the phone is switched on.
From Phone Menu
1.
4
Security
A
(Select)
2.
4
Codes
A
(Select)
3.
4
PIN Control
A
(Change)
4. Enter the PIN number
A
(OK)
5.
A
(Change) set to either enable or disable the PIN
6.
@
(OK)
NOTE: Your phonecode must be 6 to 12 digits. You are advised to
write down your phonecode. If the phonecode is entered incorrectly 10
times, the phone will cease to operate permanently. If you change the
phonecode from the second time on, you must enter the previous
phonecode first, then enter the new phonecode twice.
NOTE: If the PIN code is entered incorrectly 3 times, the PIN will be
blocked. To unblock the PIN, you must enter your PUK code. If you
enter an incorrect PUK code 10 times, your SIM will be blocked
permanently.