Plantronics explorer 220 - Manual (Page 5)

5
220
If headset has previously been paired with another device, please
follow these instructions for pairing a second time. Ensure that
the headset is fully charged. For instructions on set-up and pairing
with other Bluetooth devices, please consult your Bluetooth device
user guide.
Begin with headset turned off.
1. Press and hold down the call
control button for 8 seconds
until the headset status
indicator begins to flash blue
then red.
The headset is now in pairing
mode for the next 120
seconds.
1. 2.
3.
PAIRING
2. While the headset is flashing,
use the phone menu to
search for Bluetooth devices
and select “220Plantronics.”
3. When prompted for a
passkey, enter 0000. Headset
will flash blue when paired
successfully.
NOTE: The headset can pair to multiple Bluetooth devices, but will
only connect to one device at a time. The headset will automatically
connect to the last device to which it was connected.