Panasonic BL-C30A - Manual (Page 28)

Operating Instructions
28
Basic
(1) Network Configures the network settings such as connection mode
to connect the camera to the network (see page 30).
(2) Wireless Configures wireless network (see page 34).
(3) UPnP Enables automatic port forwarding or shortcut to the
camera (see page 37).
(4) Viewnetcam.
com Registers with the Viewnetcam.com service (see page 38).
(5) Date and Time Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page 40).
(6) Camera Sets camera name, white balance, AC power source
frequency and pan/tilt range (see page 42).
Account
(7) Administrator *1
*1 If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi-
Camera Setup page] settings, changes will not be applied to the video (Motion JPEG)
viewers. Restart the camera to make changes applied to all video viewers.
Sets authentication setting and administrator security (user
name and password) (see page 46).
(8) General User *1 Sets general user security (user name and password) and
general user's feature restriction (see page 50).
Advanced
(9) Image Display Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, limit continuous motion
JPEG
*1 , and language (see page 52).
(10) Multi-Camera *1 Sets the camera IP address or host name, camera name on
the Multi-Camera page (maximum 12 cameras) (see page
55).
(11) Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page
57 or page 64).
(12) Operation
Time Sets time period to display camera images (see page 74).