Primera Technology CD Color Printer II - Manual (Page 22)

18 Using the CD Color Printer with Windows
2. In Windows 95/98, click on the Details tab of the
Properties window and select the Setup button. In
Windows NT, click on the Advanced tab of the Document
Settings window.
NOTE: Most applications allow you to change these same printer driver
options from their ÒPrintÓ and/or ÒPrinter SetupÓ screens. This
means that you donÕt have to go back to the main printer setup
window each time you want to change a setting or option in the
printer driver. These applications will usually give you the same
choices and options, but in a slightly altered format.
3. In Windows 95/98, the CD Color Printer setup screen
appears. In Windows NT, the CD Color Printer Document
Settings appear. Although each printer driver displays the
print options in a slightly different format, the basic
options are the same. Refer to the remainder of this section
for a description of each printer driver option.
Media
Click on the Media down arrow. A list of media selections
appears. Select the CD option if printing onto printable CDÕs.
Select Booklet if printing onto a jewel case booklet. Select
Insert
if printing onto a jewel case insert. When sizing your
images for printing, keep in mind that each type of CD media
has the following maximum printable areas:
CD 4.56Ó round (116mm), Booklet 4.63Ó x 4.67Ó (117.7 x 118.5mm),
and Insert 4.57Ó x 5.9Ó (116 x 150mm). For a complete description
of each type of print media and to see how each is installed, refer
to Section 2.
Ink Cartridge
Select either Color or Monochrome according to the type of
ink cartridge you have installed.
Print Quality
Select the appropriate print quality option for your image.
Keep in mind that Draft provides the lowest quality but fastest
print, and that Photo 600 x 300 provides the highest quality but
slowest print. You may wish to experiment with these options
to see which one is best for your particular CD label.
510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 18