Recommended audio output setting, Press [function menu, Select “other functions – Panasonic DMP-BD85 User Manual
Page 34: Select “setup, Audio, Set each item
34
VQT2H76
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.
Press [FUNCTION MENU]
>
select “Other Functions”
>
“[OK]”
>
select “Setup”
>
“[OK]”
>
“Audio”
>
Set each item
For details of the each item, refer to page 27.
Recommended audio output setting
Example of connected equipment
TV via HDMI
*1
Receiver with
HD
audio
*2
decoder via
HDMI
Receiver without
HD
audio
*2
decoder via
HDMI
Receiver via
COAXIAL or
OPTICAL
Receiver
via analog output
*3
Setup menu
“Digital
Audio
Output”
“Dolby D/Dolby
D +/Dolby
TrueHD”
“PCM”
“Bitstream”
“PCM”
“PCM”
No effect
“DTS/DTS-HD”
“PCM”
“Bitstream”
“PCM”
“PCM”
No effect
“BD-Video
Secondary
Audio”
“Off”
“Off”
“Off”
“Off”
“Off”
“PCM Down Conversion”
No effect
No effect
No effect
“Off”
*4
No effect
“Downmix”
“Stereo”
No effect
No effect
“Stereo”
*5
No effect
“High Clarity Sound”
“Enable”
“Disable”
*6
“Disable”
*6
“Disable”
*6
“Disable”
*6
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via except HDMI, these settings have no effect.
*2
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3
Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [FUNCTION MENU]
>
“Other Functions”
>
“Setup”)
*4
If the connected equipment that does not support 96 kHz, set to “On”.
*5
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
*6
When connected to TV via HDMI terminal for outputting image, set to “Enable”.
DMP-BD85VQT2H76_eng.book 34 ページ ２００９年１２月３日 木曜日 午後４時５７分