Panasonic AG-DV2000P - Manual (Page 60)

Other Editing Functions
These functions are used to confirm, change, etc. programs.
Once all program settings are completed, the screen
shown at right is displayed.
Example: Video Insert
This portion varies,
depending on the
editing function that
was programed.
On Screen Display
To check/change programs:
1 Select Confirm/Change, and then press OK.
The program list for the playback unit is displayed.
To check the program list for the recording unit, press
RECORDER.
To just confirm the program settings, press EDIT MENU.
If corrections are needed, continue with the procedure
described below.
2 Select the program number for which changes are to be
made, and then press OK.
The Program Change screen for the selected program
number is displayed.
3 Press JOG/SHUTTLE.
4 Use the Jog Dial/Shuttle Ring to search for the editing
point that is to be corrected.
5 To change an edit start point, press MARK IN.
To change an edit end point, press MARK OUT.
6 Once all changes are completed, press OK.
7 Press EDIT MENU.
On Screen Display
60