Philips VR9185 User Manual
Page 27
i
Switch off with the
STANDBY m
button.
The programmed recording will only function when the
video recorder is switched off with the
STANDBY m
button.
D If any of the TIMER blocks are in use, ’
k
’ will light up
on the video recorder display.
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
STANDBY m
button.
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’SWITCH TO STANDBY - TIMER
RECORDING’ will flash on the TV screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, ’NO CASSETTE’
will appear on the TV screen and ’
k
’ will flash on the
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If `TIMER FULL´ appears on the TV screen when
you press the
TIMER k
button, you have used up all
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
press the
P
button and select the TIMERR block
with the
;P
or
P =
button.
D Programme numbers ’E1’ and ’E2’ are for
recordings from other sources (through scart socket
EXT.1 AV 1
or
EXT.2 AV 2
).
How to check or change a programmed
recording (TIMER)
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
TIMER k
button on the remote control.
The programming mode selected last is marked.
c
Select the line ’TIMER LIST’ with the
P =
or
;P
button and confirm with the
P
button.
d
Select the programmed recording (TIMER) you want to
check or change with the
;P
or
P =
button.
e
Press the
P
button.
f
Select the entry field with the
Q
or
P
button.
g
Change any information with the
P =
or
;P
button or
with the
0-9
buttons.
D Under ’END’, use the
SELECT
button to select the
recording speed ’SP’ or ’LP’.
h
Confirm with the
OK
button.
i
To end, press the
TIMER k
button.
j
Make sure that the cassette you have put in can be
recorded on. Switch off with the
STANDBY m
button.
D The programmed recording will only function when
the video recorder is switched off with the
STANDBY m
button.
25