Pioneer DVR-545H-S - Manual (Page 134)

The Initial Setup menu 16
134
En
Manual CH Setting Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
PREV /
NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to On .
• Set the CH SYSTEM setting to match the channel
system of your country or region.
• Set the
CHANNEL setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the
AFT
setting to Off then adjust the Level setting.
• Set the Sound System setting to match the sound
system of your region.
• The
Name field allows you to input a name of up to
five characters for the current channel preset.
• If the currently selected channel is scrambled
requiring a decoder connected to the
AV2 (INPUT 1/
DECODER) , set the Decoder setting to On .
Channel Swapping Next Screen Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press
ENTER .
Video In/Out
Input Colour
System Next Screen Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the
CHANNEL +/– buttons to change the
preset. On the default Auto setting the recorder can
generally correctly detect whether the input signal is
PAL, SECAM, 3.58 NTSC or PAL-60, but in some
cases you may have to set it manually if the picture is
displayed incorrectly.
See also About the input colour system on page 145 for more information on this setting.
Setting Options Explanation
DVR645H_WY_EN.book 134 ページ ２００６年７月５日 水曜日 午前１０時２５分