Philips VR 260/07 - Manual (Page 36)

“T
URBO
T
IMER
”-R
ECORDING
E
NGLISH
36 36
2 The display shows the programme number to
which the video recorder is currently set,
e.g.: “PROG. 01”. Change – if necessary – the
displayed programme number with ==PP-- or ;;PP++
(or with 00--99).. Confirm with the TTU URRBBO O
TTIIM MEERR button.
1 Press the TTU URRBBO O TTIIM MEERR button on the
remote control.
““TTuurrbboo TTiim meerr””--RReeccoorrddiinngg
3 The display shows the actual starting time,
e.g.: “START 20:00”. Change – if necessary –
the displayed start time with ==PP-- or ;;PP++ (or
with 00--99)
4 Confirm with the TTU URRBBO O TTIIM MEERR button
5 The display shows a suggestion for the end of
the recording e.g.: “END 22:00” (Start time
+ 2 hours). Change – if necessary – the
displayed finish time with ==PP-- or ;;PP++ (or with
00--99).. Confirm with the TTU URRBBO O TTIIM MEERR
button. The display will briefly show the
message “OK”.
0 1
2 0 : 0 0
2 2 : 0 0
Using the “Turbo Timer”, you can make a programmed recording
within the next 24 hours quickly and simply, without having to
switch on the TV set.All you need to do now is enter or confirm
the desired programme number and start and finish time in the
video recorder.