Planar PT1503NT User Manual

Page 14

Advertising
background image

9

OSD Exit Option

Use the OSD Exit item to close the OSD menu.

The OSD will close by itself if left inactive.


Note:

1. No

Video

When the monitor is ON and there is no
Video signal received, the following
message will be displayed.

2.

Signal out of monitor’s supported range
(Please refer to Addendum)
When the frequency range of the signal is out of the monitor’s specifications,
the display will show the following message on two cases:

Case 1:

The incoming frame rate is higher than

75Hz.

In this case, the screen display may not be

centered and a warning message appears.

Case 2:

The incoming resolution is higher than

1024x768.

In this case, the video data will be turned off

and a warning message appears at center.


Advertising