Pioneer VSX-817-S/-K - Manual (Page 13)

Connecting up 03
13
En
English
Français
Deutsch
Nederlands
Italiano
Español
Connecting a TV and DVD player
This page shows you how to connect your DVD
player and TV to the receiver.
1 Connect a coaxial digital audio output on
your DVD player to the DIGITAL COAX 1
(DVD/LD) input on this receiver.
Use a coaxial digital audio cable for the
connection.
1
2 Connect the composite video output and
the stereo analog audio outputs 2 on your
DVD player to the DVD/LD inputs on this
receiver.
Use a standard RCA video cable
3
and a stereo
RCA phono cable for the connection.
• If your DVD player has multichannel
analog outputs, see Connecting the
multichannel analog outputs below for how
to connect it.
3 Connect the analog audio outputs from
your TV to the TV/SAT inputs on this receiver.
This will allow you to play the sound from the
TV’s built-in tuner. Use a stereo RCA phono
cable to do this.
• If your TV has a built-in digital decoder, you
can also connect an optical digital audio
output from your TV to the
DIGITAL OPT 1
(CD) input on this receiver. Use an optical
cable for the connection. 4
4 Connect the MONITOR OUT video jack on
this receiver to a video input on your TV.
Use a standard RCA video cable to connect to
the composite video jack.
5
The illustration shows the VSX-817, but
connections for the VSX-517 are the same.
Note
1 If your DVD player only has an optical digital output, you can connect it to the optical input on this receiver using an optical
cable. When you set up the receiver you’ll need to tell the receiver which input you connected the player to (see
The Input Assign
menu on page 45).
2 This connection will allow you to make analog recordings from your DVD player.
3 •
VSX-817 model only – For better quality, you can also connect with S-video using the S-VIDEO DVD/LD jack.
• If your player also has a component video output, you can connect this too. See Using the component video jacks on page 16.
4 In this case, you’ll need to tell the receiver which digital input you connected the TV to (see The Input Assign menu on page 45).
5 • VSX-817 model only – For better quality, you can also connect with S-video using the S-VIDEO MONITOR OUT jack.
• See Using the component video jacks on page 16 to use the component video outputs to connect this receiver to your TV.
COAX
OPT
OPT
(CD)
ASSIGNABLE
DIGITAL IN
1
2
(DVR/VCR)
COAX
(DVD/LD)
1
2
(TV/ SAT)
AM
LOOP
FM UNBAL
75 Ω
IN
IN
IN
MONITOR
OUT
OUT
VIDEO
SUB
WOOFER
IN
IN
IN
IN
OUT
OUT
IN
CD
DVR /
VCR
TV /
SAT
DVD
/LD
PLAY
CD-R
/ TAPE
/ MD
FRONT
PREOUT
REC
ANTENNA
D V D 5.1CH INPUT
AUDIO R L
IN AUX
ASSIGNABLE DIGITAL IN
IN
IN
IN
MONITOR OUT
S-VIDEO
OUT
DVR /
VCR
TV /
SAT
DVD
/LD
TV
VSX-817
ANALOG AUDIO OUT
L R
DIGITAL
AUDIO OUT
OPTICAL VIDEO IN
DVD player
AUDIO R L
DIGITAL OUT ANALOG OUT
COAXIAL VIDEO OUT
1
2
4
3
VSX517_817.fm 13 ページ ２００７年２月２２日 木曜日 午後８時１１分