Panasonic CQ-RDP472N - Manual (Page 24)

To Remove the Unit
q
Remove the removable face plate.
(a) Press the release
button [ ].
(b) Pull on the right side of the unit.
w
Remove the Trim Plate t with a screwdriver.
MONO/LOC
SOURCE
PWR
PTY
1
2
w
q
24
CQ-RDP472N
21
E
N
G
L
I
S
H
e
Pull out the unit while pushing down the lock
lever with a screwdriver.
r
Remove the unit pulling with both hands.
Installation
(continued)
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
Contact
Pull out
t Trim Plate
Screwdriver
Lock Lever
Screwdriver